Shop By Category Film & Film Cameras Instant Print Cameras Instax
This hybrid instant camera offers the ability to select and print favourite photos after shooting, with enhanced features for creativity. It allows video capture and frame selection for perfect prints, supports time-lapse collages, and includes a sequence filter for action shots. The selfie mirror and 4x zoom enhance versatility, while internal memory and microSD support ensure ample storage. Editing options with filters and a rechargeable battery make it a convenient choice for capturing and printing moments.
The Fuji Instax SQ20 Black offers a blend of modern technology and instant photography for a creative experience.
This camera allows you to select and print your favourite photos after shooting, providing flexibility and creativity.
Enhance your images with a variety of filters including a special sequence filter that captures motion, as well as frame grab and timeshift collage functions for dynamic shots.
With a selfie mirror and 4x digital zoom, achieving the perfect shot is easier than ever.
The built-in memory can store around 50 images, with additional capacity available via a Micro SD card. Easily reprint up to 50 photos from the print history.
Equipped with a built-in rechargeable battery, the camera is convenient for on-the-go use, offering approximately 100 prints per full charge.
| Image sensor | 1/5-in., CMOS with primary color filter |
|---|---|
| Effective pixels | 1920 x 1920 |
| Storage media | Built-in memory, microSD/microSDHC memory card |
| Recording capacity | |
| (still picture) | Built-in memory: Approx. 50 files (still picture), Approx. 30 seconds (movie) microSD/microSDHC memory card: Approx. 1000 files per 1 gigabyte |
| (movie) | microSD/microSDHC memory card: Approx. 3 minutes (total) per 1 gigabyte |
| File system | Still picture: Compliant with Design Rule for Camera File System (DCF), Exif Ver.2.3, Compliant with JPEG and PIM |
| Movie | 800 x 800 x 15 fps, H.264 (No sound can be recorded.) |
| Focal length | Fixed as 33.4 mm (35-mm format equivalent) |
| Aperture | F2.4 |
| Auto focus system | Single AF (Contrast-detect TTL, equipped with AF illuminator) |
| Continuous AF | Only for movie shooting |
| Focus range | 10cm/3.9 in. to 8 |
| Shutter speed | 1/7500 sec. to 1/2 sec. (Auto), maximum 10 sec. in Bulb mode |
| Sensitivity | ISO 100 to 1600 (Auto) |
| Exposure control | Programmed AE |
| Exposure compensation | -2.0 EV to +2.0 EV in increments of 1/3 EV |
| Metering | 256-segment through the lens (TTL) metering, Multi metering |
| White balance | Auto |
| Flash | Auto/Compulsory flash/Suppressed flash |
| Effective range | Approx. 50 cm to 8 m/1.6 ft. to 26.2 ft. |
| Shooting mode | Standard, Double exposure, Bulb mode, Split, Collage, Time Shift Collage |
| Self-timer | Approx. 10 sec./Approx. 2 sec. |
| Image effect | 21 Filters (18 for still picture, 3 for movie shooting only), Brightness adjustment, Vignette |
| Playback function | Trimming, Multi image playback |
| Film | FUJIFILM Instant Film “instax SQUARE” (Purchased separately) |
|---|---|
| Photo capacity | 10 prints/pack |
| Film size | 86 mm x 72 mm/3.4 in. x 2.8 in. |
| Image size | 62 mm x 62 mm/2.4 in. x 2.4 in. |
| Supported image size | 800 x 800 dots |
| Printing solution | 12.5 dots/mm (318 dpi, 80 µm dot pitch) |
| Printing levels | 256 levels per color (RGB) |
| Supported image format | JPEG (Some images saved with a photo editing/processing software may not be displayed or printed.) JPEG files captured from a movie file can be printed. |
| Printing time | Approx. 12 seconds |
| Print timing | Printing shortly after shooting/Printing after selecting image |
| Printing function | Images on built-in memory/micro SD card |
| Reprint | Printable up to the past 50 prints (Up to 50 images stored in print history) |
| Digital zoom | Up to 4 X in shooting/printing |
| LCD monitor | 2.7-in. (6.9 cm) TFT color LCD monitor, Pixels: Approx. 230k-dots |
|---|---|
| External interface | Micro USB Micro-B (For charging/file copying) |
| Power supply | Li-ion battery (Built-in, Cannot be removed.) |
| Charging function | Built-in |
| Printing capacity | Approx. 100 prints (From when the battery is charged fully) * Varies depending on the conditions of use. |
| Charging time | Approx. 2 to 3 hours (Using 0.5 A USB port) * Varies depending on air temperature. |
| Dimension | 119 mm x 50 mm x 127 mm/4.7 in. x 2 in. x 5 in. (W x D x H) |
| Weight | 390 g/13.8 oz. (excluding film pack and memory card) 440 g/15.5 oz. (including film pack and memory card) |
| Operating environment | Temperature: 5 °C (41 °F) to 40 °C (104 °F) |
