Broncolor power packs are constructed for peak performance under heavy use. Long-life capacitors, durable components and solid state design ensure trouble-free operation for years. A company already known for creating benchmark products, Broncolor has turned its attention to providing its legendary features, power and conveniences to a pack which is a fraction of the price of its previously most-affordable pack with the introduction of the 1,200 W/s Senso A2 power back. The lightweight Litos Flash head is an ideal match for the pack, so Broncolor includes one with this Senso Kit 21 - 1 Head Kit.
The Senso A2 provides symmetrical or asymmetrical independent control in 1/10 stop increments of each its three flash head outlets over a 6.5 stop range. As with all Broncolor products, you can expect negligible color shift throughout the whole range with very short flash durations and in the Senso A2's case, recycling times as short as 0.4 seconds.
The sleek design features rubber protective corners and an ergonomic, intuitive control panel featuring push button and rocker control of the pack. The LED readout panels can be set for either f-stops or W/s output. At 10.1 lb the Senso A2 can take to the road when needed. The pack can be triggered by cable and photo cell and is controllable remotely from camera or computer via the built-in RF receiver at distances up to 656' (200 m).
The Litos head weighs 5 lb, has a rating of 1,200W/s and employs a powerful 300W modeling lamp but the Litos can take the heat. It features an intelligent cooling system which responds to pack and head heat. The head's bayonet system gives the Litos access to Bron's extensive array of light shaping tools. An ergonomic tilting head allows easy positioning of the head.
Besides the Senso A2 pack and 1 Litos head with cable, the kit includes a 16.4' (5 m) sync cable, a 28 x 28" ( 70 x 70 cm) Flex softbox with adapter and a carrying case to store it all.
Maximum Performance on Assignment
Senso unites all the features of a studio flash system in a compact format that is ideal for on-location work. In brief:
3 lamp outlets
Maximum output 1,200W/s and just 13W/s minimum output
Control range across 6.5 f-stops in full and 1/10 f-stops
Symmetric and asymmetric power distribution
Short flash duration, short charging times
Well organized front panel with digital display per channel and illuminated keypad
Output display switchable from f-stops to W/s
Lightweight, Easy and Reliable
Senso power packs can be switched over from symmetric to asymmetric power distribution with a toggle switch. In the symmetric mode, the power pack's full energy can be routed to one lamp outlet.
The Broncolor RFS 2 triggering system allows independent flash release in the same studio on 99 units per workstation (max. 99 workstations). This feature eliminates unintentional triggering. All Senso power packs can be triggered via radio over a distance of up to 200 m (over 650'). Additionally, Senso power packs are also equipped with a photocell and can be triggered by any studio flash unit.
The control range extends over up to 6.5 f-stops, giving the photographer generous latitude in a light design.
Short Charging Times
The short charging time of 0.4 seconds at minimum output or 1.5 seconds at maximum output (230V) enables fast flash sequencing of moving models. Senso also features an acoustic and an optical ready signal.
Senso Shows True Color
The color temperature of the Senso power pack is constant across three f-stops because unneeded capacitors are switched off.
Long Service Life
The heat dissipated by all key power pack components is constantly monitored by the on-board processor. This protects the power pack against overheating and optimizes its service life. The built-in data memory assures that all settings are preserved when the unit is switch