Sony ECM-W1M Wireless Microphone for Cameras with Multi-Interface Shoe

The Sony ECM-W1M Wireless Microphone is designed specifically for Sony cameras and camcorders that feature the proprietary Multi-Interface Shoe. The microphone comprises two components: a transmitter and a receiver. They communicate wirelessly with each other using Bluetooth technology and feature a range of up to 100', depending on conditions. With the receiver attached to your camera it is still possible to capture additional audio using the camera's built-in microphone. In addition, audio picked up by the camera can be relayed back to the transmitter. The transmitter features a headphone jack that allows the camera operator to communicate with the person wearing the transmitter by speaking into the camera's microphone. There is also a headphone jack on the receiver so that the camera operator can monitor audio even if the camera itself doesn't provide a headphone out of its own. Finally, the transmitter features a 3.5mm mic input allowing you to use a third-party microphone rather than the built-in one.

The transmitter can either clip on your belt, or be worn using the included elastic arm band

Includes windscreen to help reduce wind noise when filming outdoors

Includes two earphones for monitoring audio and a pouch to store everything in

For Sony cameras and camcorders with Multi-Interface Shoe

Transmitter powers from a single AAA battery; receiver power directly from the camera

Corresponds to "5.1-channel Center Mic" mode

• Compatibility Receiver: Sony cameras and camcorders with Multi-Interface Shoe
• Capsule Monaural electret condenser
• Pick-up Pattern Non-directional
• Frequency Response 300 Hz to 9 kHz
• Wireless Interface Bluetooth - interoperability with other Bluetooth products is not guaranteed
• Wireless Range Up to 100' / 30 m - depends on conditions
• Connectivity
• Transmitter: 1 x 3.5 mm mini headphone jack 1 x 3.5 mm microphone input
• Receiver: 1 x 3.5 mm mini headphone jack
• Power Source Transmitter: 1 x AAA battery
• Receiver: Power from Multi-Interface Shoe
• Operating Temperature 32 to 104°F / 0 to 40°C
• Storage Temperature 4 to 140°F / -20 to 60°C
• Dimensions Transmitter: 0.7 x 2.6 x 1.2" / 19 x 66 x 30 mm
• Receiver: 1.1 x 1.5 x 1.1" / 27 x 38 x 29 mm
• Weight Transmitter: 0.7 oz / 19 g Receiver: 0.6 oz / 17 g